Connect a device and check output

Once video and script playback work together, connect a device to follow the motion. Save a device profile, check its channels and range, and select that profile for future playback.

Have the device's connection key, port, or service address ready. These screenshots show the setup controls; verify the actual connection with your device and firmware.

01 Open Devices and add a profile

  1. In the sidebar, click Devices.
  2. Click Add device. An empty list also offers Add your first device.
  3. Choose your device type under Which device do you use?
  4. Enter a recognizable Device name and, if needed, select Set as default device.
Choose the device type first so Connection shows the appropriate settings.
Device types in Add device
Check the result
With a name and device type selected, enter the matching connection details.

02 Enter the connection details

TypeWhat you'll need
The HandyThe device's Connection key.
Autoblow Ultra / VacuGlide 2The device's Device token.
LovenseLovense Remote; choose Mobile QR or PC Remote for your setup.
OSR / TCodeUSB / Serial, Local network, or Bluetooth, with settings that match the firmware.
OSSMSupported Bluetooth firmware. Prepare the device after connecting.
BluetoothA Bluetooth adapter and device. Confirm supported outputs after connecting.
Buttplug / IntifaceA running Intiface Central instance and its local WebSocket address.

OSR / TCode example

  1. Choose USB / Serial, then use Port to select the device port. If needed, click Refresh ports.
  2. Check Baud rate against the firmware settings. Change DTR, RTS, and the startup delay in Advanced settings only if the firmware requires it.
  3. For Local network, enter the protocol, address, and port configured in the device firmware.
  4. For Bluetooth, select the device and review its outputs. Resolve Bluetooth permission or discovery errors before retrying.
Connection fields depend on the device type. Serial ports, network addresses, and Bluetooth selection are not interchangeable.
OSR / TCode connection settings with USB / Serial, network, and Bluetooth options

Keep connection keys and device tokens out of screenshots. When editing saved credentials, leave the field blank to keep the current value, or use Forget credential to remove it. Secure storage on this computer and keeping credentials only until you quit are separate options.

03 Check Output settings

Find and confirm the controller, then review its outputs. "10 outputs enabled" describes the profile, not detected hardware.
Bluetooth setup showing Find device, Edit outputs, and the configured output count
  1. Open the saved profile's Settings and check the Output tab.
  2. Check each axis's enabled state, range, and mapping.
  3. For TCode Bluetooth, Edit outputs controls output percentages; Firmware compatibility limits is the firmware's raw protocol range. Keep these settings distinct.
  4. Save or apply the profile before testing.

Configured outputs describes your profile, not a complete list detected from the physical device. An axis appearing here does not confirm hardware support.

For examples of Range, Intensity, Invert, Reset axis, and function-channel ceilings, see Adjust output by axis. The example includes the output preview after Apply, showing how output settings differ from script edits.

04 Connect, test, and play

  1. After entering Connection settings, use the connection action shown in the dialog. For a saved device, click Connect.
  2. Read the actual status: Connected, Ready to send or a specific error message describes the current connection state.
  3. To test movement, select the appropriate channel and click Test movement. Check the physical response, then use Stop test to stop.
  4. Return to the player and check the selected device and Device output before playing the script.
  5. Use the appropriate stop control when finished. To disconnect, click Disconnect.
Check the result
Check both the app status and the device's response. With UDP, "Device response not verified" means the app has not confirmed receipt, even if it can send data.

Manage profiles and troubleshoot connections

SituationWhat to do
Port or device is missingCheck the connection, system permissions, and whether another app is using the device. Refresh the list or discover devices again.
Connected, but testing is unavailableCheck output mappings, unsaved settings, device readiness, and the reason shown in the interface.
Changing connection settingsIf a connection is active, follow the prompt to stop and disconnect before saving new settings.
Stop was not confirmedCheck the error, then retry Stop output or restore the connection as directed.
Removing an unused profileUse Remove profile and confirm the selection. Removing a profile does not delete videos or scripts.
Closing with unsaved changesKeep editing or discard the draft. Confirm that any changes you want to keep have been saved.